一个O-RAN YANG语言文件:o-ran-interfaces.yang

NETCONF YANG语言文件语法格式:https://blog.csdn.net/Rong_Toa/article/details/104354287

module o-ran-interfaces {
  yang-version 1.1;
  namespace "urn:o-ran:interfaces:1.0";
  prefix "o-ran-int";


  import ietf-inet-types {
    prefix "inet";
  }

  import iana-if-type {
    prefix "ianaift";
  }

  import ietf-interfaces {
    prefix "if";
  }

  import ietf-ip {
    prefix "ip";
  }

  import ietf-hardware {
    prefix "hw";
  }

  import ietf-yang-types {
    prefix "yang";
  }

  import iana-hardware {
    prefix "ianahw";
  }

  organization "O-RAN Alliance";

  contact
    "www.o-ran.org";

  description
    "This module defines the YANG definitions for managng the O-RAN
     interfaces.

    Copyright 2019 the O-RAN Alliance.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
    ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGE.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
    this list of conditions and the above disclaimer.
    * Redistributions in binary form must reproduce the above copyright notice,
    this list of conditions and the above disclaimer in the documentation
    and/or other materials provided with the distribution.
    * Neither the Members of the O-RAN Alliance nor the names of its
    contributors may be used to endorse or promote products derived from
    this software without specific prior written permission.";

  revision "2019-02-04" {
    description
      "version 1.0.0

      1) imported model from xRAN
      2) changed namespace and reference from xran to o-ran";

    reference "ORAN-WG4.M.0-v01.00";
  }

  feature UDPIP-BASED-CU-PLANE {
    description
      "This feature indicates that the RU supports the UDP/IP based transport
      for the CU plane.";
  }

  feature ALIASMAC-BASED-CU-PLANE {
    description
      "This feature indicates that the RU supports the alias MAC address
       based transport for the CU plane.";
  }


  typedef pcp {
    type uint8 {
      range "0..7";
    }
    description
      "Priority Code Point. PCP is a 3-bit field that refers to the
      class of service applied to a VLAN tagged frame.  The
      field specifies a priority value between 0 and 7, these values
      can be used by quality of service (QoS) to prioritize
      different classes of traffic.";
    reference
     "IEEE 802.1Q-2014: Virtual Bridged Local Area Networks";
  }

  grouping cos-marking {
    description
      "Configuration data for CU Plane ethernet CoS marking";
    container class-of-service {
      description
        "CoS Configuration";
      leaf u-plane-marking {
        type pcp;
        default 7;
        description
          "Marking used for default u-plane flows.
          7 represents highest priority for u-plane marking";
      }
      leaf c-plane-marking {
        type pcp;
        default 7;
        description "7 represents highest priority for c-plane marking";
      }
      leaf m-plane-marking {
        type pcp;
        default 2;
        description "2 represents highest excellent effort for m-plane marking";
      }
      leaf s-plane-marking {
        type pcp;
        default 7;
        description "7 represents highest priority for s-plane marking";
      }
      leaf other-marking {
        type pcp;
        default 1;
        description "1 represents best effort for other marking";
      }
      list enhanced-uplane-markings{
        key "up-marking-name";
        max-elements 4;
        description
          "list of mappings for enhanced (non-default) u-plane markings";
        leaf up-marking-name {
          type string;
          description "The name of the marking";
        }
        leaf enhanced-marking {
          type pcp;
          description "the enhanced u-plane marking";
        }
      }
    }
  }

  grouping dscp-marking {
    description
      "Configuration data for CU Plane DSCP marking";
    container diffserv-markings {
      description
        "DSCP Configuration";
      leaf u-plane-marking {
        type inet:dscp;
        default 46;
        description
          "Marking used for default u-plane flows.
          46 represents expedited forwarding";
      }
      leaf c-plane-marking {
        type inet:dscp;
        default 46;
        description "46 represents expedited forwarding";
      }
      leaf s-plane-marking {
        type inet:dscp;
        default 46;
        description "46 represents expedited forwarding";
      }
      leaf other-marking {
        type inet:dscp;
        default 0;
        description "0 represents best effort forwarding";
      }
      list enhanced-uplane-markings{
        key up-marking-name;
        max-elements 4;
        description
          "list of mappings for enhanced (non-default) u-plane markings";
        leaf up-marking-name {
          type string;
          description "The name of the marking";
        }
        leaf enhanced-marking {
          type inet:dscp;
          description "the enhanced u-plane marking";
        }
      }
    }
  }

// Augmentation for basic Ethernet leafs

  augment "/if:interfaces/if:interface" {
    when "if:type = 'ianaift:ethernetCsmacd'" {
      description "Applies to Ethernet interfaces";
    }
    description
      "Augment the interface model with parameters for
      base Ethernet interface";

    leaf l2-mtu {
      type uint16 {
        range "64 .. 65535";
      }
      units bytes;
      default 1500;
      description
        "The maximum size of layer 2 frames that may be transmitted
        or received on the interface (excluding any FCS overhead).
        For Ethernet interfaces it also excludes the
        4-8 byte overhead of any known (i.e. explicitly matched by
        a child sub-interface) 801.1Q VLAN tags.";
    }
    leaf-list alias-macs {
      if-feature ALIASMAC-BASED-CU-PLANE;
      type yang:mac-address;
      description
        "Augments interfaces with range of alias MAC addresses.";
    }
    leaf vlan-tagging {
      type boolean;
      default true;
      description
        "Indicates if VLAN tagging is used.
        Default true is used to enable equipment to auonomously discover that it is
        connected to a trunk port.";
    }
    uses cos-marking;
  }

// augmentation for l2vlan interfaces for VLAN definition

  augment "/if:interfaces/if:interface" {
    when "if:type = 'ianaift:l2vlan'";
    description "augments for VLAN definition";
    leaf base-interface {
      type if:interface-ref;
      must "/if:interfaces/if:interface[if:name = current()]"
            + "/o-ran-int:vlan-tagging = 'true'" {
        description
          "The base interface must have VLAN tagging enabled.";
      }
      description
        "The base interface for the VLAN sub-interafce.";
    }
    leaf vlan-id {
      type uint16 {
        range "1..4094";
      }
      description
        "The VLAN-ID.";
    }
  }

// Augmention for both ethernetCsmacd and l2vlan interfaces

  augment "/if:interfaces/if:interface" {
    when "(if:type = 'ianaift:ethernetCsmacd') or
          (if:type = 'ianaift:l2vlan')" {
      description "Applies to ethernetCsmacd and l2vlan interfaces";
    }
    description
      "Augment the interface model with parameters for all
      both ethernetCsmacd and l2vlan interfaces.";
    leaf mac-address {
      type yang:mac-address;
      description
        "The MAC address of the interface.";
    }
    container port-reference {
      description
        "a port reference used by other O-RAN modules";
      leaf port-name {
        type leafref {
          path '/hw:hardware/hw:component/hw:name';
        }
        must "derived-from-or-self(deref(current())/../hw:class, 'ianahw:port')";
// TAKE NOTE - depending on version of pyang, this may generate various
// warnings, e.g., warning: XPath for "port-name" does not exist
        description
          "O-RAN interfaces use a reference to a physical port component.

          In this case, the component name referenced must be of class type
          port, i.e., when /hw:hardware/hw:component/hw:class is derived from
          ianahw:port";
      }
      leaf port-number {
        type uint8;
        description
          "A number allocated by the server which identifies a port.
          Port number value is 0 to N-1 where N is number of ports
          in the device.

          This value is fixed for the lifetime of the equipment, i.e., cannot be
          changed during equipment reboots.";
      }
    }
    leaf last-cleared {
      type yang:date-and-time;
      config false;
      description
        "Timestamp of the last time the interface counters were
        cleared.";
    }
  }

// Augmention to ietf-ip covering DSCP for CUS Plane

  augment "/if:interfaces/if:interface/ip:ipv4" {
    if-feature UDPIP-BASED-CU-PLANE;
    description "augments for IPv4 based CUS transport";
    uses dscp-marking;
  }
  augment "/if:interfaces/if:interface/ip:ipv6" {
    if-feature UDPIP-BASED-CU-PLANE;
    description "augments for IPv6 based CUS transport";
    uses dscp-marking;
  }

  // Augmention to ietf-ip covering DSCP for M-Plane

    augment "/if:interfaces/if:interface/ip:ipv4" {
      description "augments for IPv4 based M-Plane transport";
      leaf m-plane-marking {
        type inet:dscp;
        default 18;
        description "18 represents AF21 or 'immediate traffic'";
      }
    }
    augment "/if:interfaces/if:interface/ip:ipv6" {
      description "augments for IPv6 based M-Plane transport";
      leaf m-plane-marking {
        type inet:dscp;
        default 18;
        description "18 represents AF21 or 'immediate traffic'";
      }
    }

  rpc reset-interface-counters {
    description
      "Management plane triggered restart of the interface counters.";
  }
}

 

已标记关键词 清除标记
©️2020 CSDN 皮肤主题: 酷酷鲨 设计师:CSDN官方博客 返回首页