How-to: Build VPP FD.IO with Mellanox DPDK PMD on top CentOS 7.7 with inbox drivers.

目录

References

Prerequisites

Installation, Compilation and Configuration


This short document will guide you how to compile and install VPP with Mellanox DPDK PMD over a Mellanox ConnectX-4 and ConnectX-5 interfaces.

References

Prerequisites

1. Install CentOS 7.7

2. Set up an account to use the Linux Foundation resources. To set up the account, refer to The Linux Foundation website: https://identity.linuxfoundation.org.

3. Set up a Gerrit account and apply an ssh public key. Follow the instructions on the FD.IO wiki web page: https://wiki.fd.io/view/DEV/Setting_up_Gerrit#Log_into_Gerrit

4. Install the following prerequisites packages:

yum install -y git cpp gcc rpm-build openssl-devel libmnl-devel numactl-devel epel-release net-tools rdma-core-devel nasm

Installation, Compilation and Configuration

1. Download VPP main master branch.

git clone ssh://<USERNAME>@gerrit.fd.io:29418/vpp.git
git checkout origin/stable/<"Release_version_number">
  • Use your Linux Foundation user account name (see Prerequisites above) instead of <USERNAME> as shows in above example.
  • To find desired <"Release_version_number"> do: "git -r branch" form VPP root git directory.

2. For VPP 18.07 ONLY: Enable the mlx5 PMD driver compilation as follow:

cd /vpp
sed -i '/vpp_uses_dpdk_mlx5_pmd/s/^# //g' build-data/platforms/vpp.mk 

3. Compile and install VPP with DLopen linkage

cd /vpp

make install-dep

make dpdk-install-dev DPDK_MLX5_PMD=y DPDK_MLX5_PMD_DLOPEN_DEPS=y

## Copy manually newly compiled shared module: ##

cp /opt/vpp/external/x86_64/lib/librte_pmd_mlx5_glue.so* /usr/lib64/

## For VPP 18.07 ONLY, check vpp-dpdk-devel package is installed: ##

rpm -qa | grep vpp-dpdk-devel

## Compile new binary: ##

make build-release vpp_uses_dpdk_mlx5_pmd=yes DPDK_MLX5_PMD_DLOPEN_DEPS=y

## Building RPM packages: ##

make pkg-rpm vpp_uses_dpdk_mlx5_pmd=yes DPDK_MLX5_PMD_DLOPEN_DEPS=y

## Install VPP RPMs: ##

rpm -ivh build-root/vpp-sel*.rpm

rpm -ivh build-root/vpp-lib*.rpm

rpm -ivh build-root/vpp-19*.rpm

rpm -ivh build-root/vpp-plug*.rpm 

4. Compile and install without DLopen linkage

cd /vpp

make install-dep

make dpdk-install-dev DPDK_MLX5_PMD=y DPDK_MLX5_PMD_DLOPEN_DEPS=n

## Compile new binary: ##

make build-release DPDK_MLX5_PMD=y DPDK_MLX5_PMD_DLOPEN_DEPS=n

## Building RPM packages: ##

make pkg-rpm vpp_uses_dpdk_mlx5_pmd=yes DPDK_MLX5_PMD_DLOPEN_DEPS=n

## Install VPP RPMs: ##

rpm -ivh build-root/vpp-sel*.rpm

rpm -ivh build-root/vpp-lib*.rpm

rpm -ivh build-root/vpp-19*.rpm

rpm -ivh build-root/vpp-plug*.rpm 

5. Edit the /etc/vpp/startup.conf start file to include the following:

Important: Uncomment no-mulit-seg parameter. It disables jumbo packets handling and improves performances significantly.

File

unix {
  nodaemon
  log /tmp/vpp.log
  full-coredump
}

dpdk {
        dev 0000:07:00.0
        dev 0000:07:00.1
        no-multi-seg
        dev default {
                num-rx-queues 2
        }
}

Insert PCI slot numbers of ConnectX-4/5 interfaces with correct IDs at dpdk { dev } section, as above example.

To verify the correct IDs use:

lspci -nn | grep -i mel

07:00.0 Ethernet controller [0200]: Mellanox Technologies MT27620 Family [15b3:1013]

07:00.1 Ethernet controller [0200]: Mellanox Technologies MT27620 Family [15b3:1013]

6. Start VPP.

vpp -c /etc/vpp/startup.conf

7. Enter the VPP Command Line Interface.

vppctl

8. Configure L3 interfaces as shown in the example below:

VPP Cli

_______    _        _   _____  ___
__/ __/ _ \  (_)__    | | / / _ \/ _ \
_/ _// // / / / _ \   | |/ / ___/ ___/
/_/ /____(_)_/\___/   |___/_/  /_/


vpp#  set int ip address HundredGigabitEthernet7/0/0 1.1.1.1/24
vpp#  set interface state HundredGigabitEthernet7/0/0 up
vpp#  set int ip address HundredGigabitEthernet7/0/1 2.2.2.2/24
vpp#  set interface state HundredGigabitEthernet7/0/1 up
vpp# show int
              Name               Idx       State          Counter          Count
HundredGigabitEthernet7/0/0              1         up
HundredGigabitEthernet7/0/1              2         up
vpp# show int address
HundredGigabitEthernet7/0/0 (up):     
  1.1.1.1/24
HundredGigabitEthernet7/0/1 (up):     
  2.2.2.2/24
local0 (dn):

 

 

已标记关键词 清除标记
相关推荐
©️2020 CSDN 皮肤主题: 酷酷鲨 设计师:CSDN官方博客 返回首页